Overview
The Automatic Grease Oil Separation Tester (Cone and Net Method) complies with the requirements of test methods NB/SH/T 0324 and ASTM D6184. It is designed to determine the oil separation tendency of greases with a penetration of not more than 340 (1/10 mm) under high-temperature conditions.
Features
1. Two-hole metal bath design with a wide temperature range, rapid heating, and a constant, uniform temperature field.
2. Fully automated operation including lowering, timing, lifting, simulating manual tapping, and alarm functions, eliminating the need for manual intervention.
3. Compatible with external balances for direct transmission of balance data to the instrument screen.
4. Automatically performs calculations according to standard formulas and stores test results.
5. Equipped with a full-range thermometer to monitor the metal bath temperature throughout the test.
Technical Parameters
1. Power Supply: AC 220V±10% 50Hz
2. Power: 1000W
3. Heating Method: Aluminum metal bath heating
4. Number of Test Holes in Metal Bath: 2 holes, diameter 76mm
5. Constant Temperature Range: Room temperature ～210℃
6. Heating Rate: Room temperature ～100℃ ≤10min
7. Constant Temperature Accuracy: ±0.5℃
8. Weighing Method: External electronic balance
9. Cone and Net Size: Complies with NB/SH/T 0324-2010 standard requirements
10. Environmental Requirements: Temperature 5℃～40℃; Humidity ≤85%