Overview

     The HK-0811A sintered glass filter maximum void diameter tester complies with the requirements of Appendix A in the SH/T 0811 test method. It measures the maximum diameter of the sintered glass filter required for the test by determining the pressure needed for the first bubble to pass through the filter. It can also be used to measure the sintered glass filter of products with mechanical impurities, etc.

Functional features

1 The gas path components are made of 304 stainless steel, which is corrosion-resistant and has high hardness

2 It can be easily pressurized. The pressure can be quickly adjusted to near the test pressure and then adjusted to the test position through the fine-tuning knob

3 It is equipped with a dedicated negative pressure bottle and a rubber stopper

Technical parameters

1 Pressure range: 0 to 0.1mPa

2 Control accuracy: 10Pa

3 Output interface: M20*1.5

4 Environmental requirements: Temperature 0 to 40℃; Humidity ≤85%