Overview

    HK-0768 Flash Point Tester (Normally Closed Cup Method) meets the requirements of the experimental method of SH/T 0768-2005 "Flash Point Determination Method (Normally Closed Cup Method)", and is suitable for the determination of the flash point of fuel oil, lubricating oil, solvent oil and other liquids by normally closed cup method, and the required sample amount is 1ml.

Features:

1. Touch screen operation, independent heating module, magnetic stirring, to ensure the temperature rise speed of the experiment

2. Built-in pressure detection flash point device, fast and accurate judgment

3. High-voltage arc ignition is adopted, and the energy and time meet the standard

4. Built-in small diaphragm air compressor to provide necessary air for the experiment

5. Built-in semiconductor refrigeration, which can be used for low temperature test

6. Factory standard testing

Technical parameters

1. Power supply: AC 220V± 10% 50Hz

2. Power: 700W

3. Arc ignition: 3J/arc, 43ms, ignition every 1°C

4. Magnetic stirring speed: (260±10) r/min

5. Air flow: (1.5±0.5) ml

6. Heating speed: 5°C/min~6°C/min

7. Test chamber: 4ml

8. Measuring range: 10°C~250°C

9. Environmental requirements: temperature 5°C~40°C; Humidity ≤ 85%