Overview

　　 HK-261C Automatic Pensky-Martens Closed Cup Flash Point Tester conforms to ASTM D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester.It is used to test for those liquids which have akinematic viscosity of 5.8mm 2/s (cSt) or more at 37.8℃ or 9.5mm 2/s (cSt) or more at 25℃(77℉),or that contain suspended solids,or have a tendency to form a surface film while under test.Other classification flash points have been established by these departments for liquids using these test methods.

Features

1. Touch screen conrol,build-in procedure A, procedure B,and procedure C.

2. Adopts both platinum electronic ignition and gas ignition

3. The apparatus can lift the upper cover, control the temperature rise, ignite, judge the flash point, strong air cooling, store automatically

4. Data transmission function,RS-232 communication interface, USB output data

5. .Imported glass temperature sensor, high precision flash point detector

6. .Built-in atmospheric pressure sensor,calculate the correction value automatically

7. Built in ignition interval program that meets standard requirements can effectively reduce the possibility of ignition and ensure safe and reliable testing

Technical parameters

1. Rated voltage:AC220V±10% 50Hz

2. Power:700W
   

3. Screen:Resistive touch screen
   

4. Heating rate:(5-6)℃/min
   

5. Agitation rate:105r/min,250r/min
   

6. Ignition:Gas ignition or electric ignition

7. Ambient requirement:Temperature:5-40℃ Humidity≤85%